All Floor Sanding
Menu

Hardwood floor sanding and refinishing

A full refinish takes your floor back to bare wood and builds new protection on top. It is the job that removes gray traffic lanes, deep scratches, old amber finish and the color you are tired of.

What happens, day by day

The pro sands the floor in passes with a drum or belt sander, starting coarse and moving to finer paper, then sands the edges and corners with an edger and hand-scrapes what neither machine reaches. The floor is vacuumed and tacked, and if you are changing the color, stain goes on and dries. Then come the coats: usually three, with a light abrasion between them so each one bonds to the last.

Most homes of a few rooms take two to three days with a waterborne finish and three to four with an oil-modified one. You can walk on it in socks after the last coat dries, put furniture back after two or three days, and lay rugs after about two weeks.

When a full sanding is the right job

  • The finish is worn through and the wood has gone gray in the traffic lanes.
  • Scratches catch a fingernail, or there are dents and dog nail marks you want gone.
  • You want a different color, lighter or darker.
  • Old varnish or oil finish has turned deep amber or orange.
  • Boards were replaced and the new ones need to match the old.

If the finish is only dull and lightly scuffed, a screen and recoat may be all it needs, at a fraction of the time.

What to ask the pro

  • Which finish they recommend for your house and why (see waterborne or oil).
  • How they handle dust, and whether their sanders run to a vacuum (see dust-free sanding).
  • Whether they will lay stain samples on your own floor before you choose.
  • Whether the price includes the stairs, the quarter round and moving furniture.