All Floor Sanding
Menu

Refinishing the hardwood under your carpet

Millions of houses built between the 1920s and the 1970s have solid oak under wall-to-wall carpet. Under the pad it is often almost new. We take up the carpet, the pad, the staples and the tack strip, then sand and refinish it into the best floor in the house.

A bedroom whose carpet was taken up and its hardwood floor refinished

How to look

Pick a closet corner or the edge of a floor vent. Pull the carpet back from the tack strip with pliers, fold back the pad, and look. Solid strip oak has narrow boards, 1 1/2 to 2 1/4 inches wide, running the length of the room. If you see plywood or concrete, there is no hardwood in that room.

What you will find

  • Rows of tack strip nails along the walls. The holes are filled and sand out.
  • Staples from the pad, sometimes thousands. We pull every one.
  • Dark spots where the pad stuck or a pet had an accident. Most of the first sand out, the second may need new boards.
  • A border of a different color where the carpet did not reach. It sands away.

Carpet removal

Some pros remove carpet as part of the job and some ask you to have it done first. Say which you prefer when you ask.

Not sure what era your house is from, or what that means for the floor? See floors by decade.