Floor sanding and refinishing in Flemington, NJ
Flemington’s 2,191 homes span the decades: more than a quarter were built in the 1960s and 70s, about a quarter in the 1940s and 50s and as many before 1940. About four in five are from before 1980, when solid oak was the usual floor.
Homes in Flemington
Flemington has 2,191 homes, and the typical one was built around 1959. About a third are lived in by their owners, and about a third are detached houses.
- Homes
- 2,191
- Lived in by their owners
- 34%
- Detached houses
- 35%
- Typical year built
- 1959
- Built before 1980
- 80%
U.S. Census Bureau, American Community Survey 5-year estimates, 2020 to 2024.
The floors you are likely standing on
The floor depends on when the house was built. Homes from the 1960s and 70s usually have solid oak strip in the living and dining rooms and hallways, parquet in some foyers and dens, and carpet over oak in bedrooms. Homes from the 1940s and 50s were usually floored in 2 1/4 inch solid red oak strip over plank subfloors. Homes built before 1940 usually have solid oak strip (2 1/4 inch is typical), and the oldest have heart pine or fir. A pro can tell which you have on the first visit.
Many homes here are rented. Between tenants, a screen and recoat restores a worn floor in a day, and a full sanding is done in two or three.
In a home built before 1978, a painted floor, painted stair risers or old baseboard paint may contain lead. Say so when you ask: sanding paint is work for a pro certified under the EPA Renovation, Repair and Painting rule.
Colors to start with
How it works
- Tell us about the floor. Where it is, what it needs, roughly how much, and when. About a minute.
- We keep your details. We are not in this area yet, so we say so now and keep your request, never sold or shared.
- We reach out if we start working here. Only All Floor Sanding, and only about your floor.
Questions about floors in Flemington
Can the floors in my home in Flemington be sanded?
Most solid wood floors can be sanded several times. An engineered floor depends on its top layer. A pro will tell you on the first visit.
How long does it take?
A few rooms are usually sanded and coated in two to three days with a waterborne finish, three to four with an oil-modified one. Light foot traffic is fine after a day, furniture after two or three, rugs after about two weeks.
Can I change the color?
Yes. Oak takes stain well, from the palest naturals to near black. A pro can lay sample patches on your own sanded floor so you choose in your own light. Browse every DuraSeal color on this site first.
Do you work on my street?
Not yet. Leave your details, and we will reach out if we start working in Flemington.
