Floor sanding and refinishing in Wister, PA
Wister is part of Philadelphia, in the 19144 ZIP code. Most of the 19144 ZIP code’s 24,162 homes are attached: rowhouses, townhouses and apartment buildings. More than half of all the 19144 ZIP code’s homes were built before 1940. Older homes often have oak strip or parquet under decades of finish.
Homes in the 19144 ZIP code
The 19144 ZIP code has 24,162 homes, and the typical one was built before 1940. Nearly two in five are lived in by their owners.
- Homes
- 24,162
- Lived in by their owners
- 37%
- Detached houses
- 7%
- Typical year built
- Before 1940
- Built before 1980
- 89%
U.S. Census Bureau, American Community Survey 5-year estimates, 2020 to 2024, for the 19144 ZIP code.
The floors you are likely standing on
Homes built before 1940 usually have solid oak strip (2 1/4 inch is typical), and the oldest have heart pine or fir. These floors usually have wood left above the tongue for more sandings. Expect old shellac or varnish to cut through, face nails to set, and gaps that a pro may fill or leave as character. Homes from the 1940s and 50s were usually floored in 2 1/4 inch solid red oak strip over plank subfloors.
Many homes here are rented. Between tenants, a screen and recoat restores a worn floor in a day, and a full sanding is done in two or three.
In an apartment or condo building, the building often sets work hours and asks for dust containment. Say so when you ask, and ask for a dust-free system.
In a home built before 1978, a painted floor, painted stair risers or old baseboard paint may contain lead. Say so when you ask: sanding paint is work for a pro certified under the EPA Renovation, Repair and Painting rule.
Colors to start with
How it works
- Tell us about the floor. Where it is, what it needs, roughly how much, and when. About a minute.
- We keep your details. We are not in this area yet, so we say so now and keep your request, never sold or shared.
- We reach out if we start working here. Only All Floor Sanding, and only about your floor.
Questions about floors in Wister
Can the floors in my home be sanded?
Usually. Solid oak in homes built before 1940 usually has wood above the tongue for several sandings. The exceptions are floors sanded too often already, where nail heads or the tongue show, and those can often be repaired board by board.
How long does it take?
A few rooms are usually sanded and coated in two to three days with a waterborne finish, three to four with an oil-modified one. Light foot traffic is fine after a day, furniture after two or three, rugs after about two weeks.
Can I change the color?
Yes. Oak takes stain well, from the palest naturals to near black. A pro can lay sample patches on your own sanded floor so you choose in your own light. Browse every DuraSeal color on this site first.
Do you work on my street?
Not yet. Leave your details, and we will reach out if we start working in Wister.
