All Floor Sanding
Menu

What floor is in your house? A guide by decade

The year a house was built says a lot about the floor under its carpet and the job it needs.

Before 1940

Solid oak strip, often 2 1/4 inch, with heart pine or fir in the oldest houses and plank subfloors underneath. Often face nailed near the walls, finished with shellac or varnish. Usually plenty of wood left to sand.

1940s and 1950s

The postwar house: 2 1/4 inch solid red oak strip throughout, nailed over plank subfloors. Carpet arrived in the 1960s and protected much of it. Some of the best floors to rediscover.

1960s and 1970s

Oak strip in the main rooms, parquet in foyers and dens, and wall-to-wall carpet over oak in many bedrooms. Plywood subfloors arrive.

1980s and 1990s

Oak in the foyer, kitchen and dining room, often 2 1/4 or 3 1/4 inch and finished on site. Carpet upstairs, sometimes over plywood with no wood at all.

2000 and later

Wider boards, more species, and many prefinished floors with beveled edges. More engineered wood. Check what you have before planning a sanding: some of these floors are best recoated.

Every town page on this site shows how many of its homes were built in each decade, from the Census.

Ready for a real answer about your floor?